多槽手動超聲波清洗機是一種結合了超聲波物理空化效應與多工位分段清洗工藝的工業設備。相較于全自動流水線，它以開放型的外觀設計和手工操作的靈活性，在中小批量生產、多品種工件清洗以及實驗室科研場景中發揮著不可替代的作用。

Multi slot manual ultrasonic cleaning machine is an industrial equipment that combines the physical cavitation effect of ultrasonic waves with multi station segmented cleaning process. Compared to fully automated assembly lines, it plays an irreplaceable role in small and medium-sized production, multi variety workpiece cleaning, and laboratory research scenarios with its open exterior design and flexible manual operation.

多槽協同與核心工藝

Multi slot collaboration and core technology

該設備最顯著的特征是“多槽”設計。通常由超聲波粗洗槽、超聲波精洗槽、鼓泡漂洗槽、噴淋槽及熱風干燥槽等多個獨立工位組成。這種分段式工藝設計，有效避免了單槽清洗時污垢脫落造成的二次污染（串槽現象）。在實際操作中，工人通過電動葫蘆吊或手工將裝有工件的清洗籃依次放入各個槽體中，依次完成除油、精洗、漂洗和干燥等全套工序。

The most prominent feature of this device is its "multi slot" design. It usually consists of multiple independent workstations such as ultrasonic coarse washing tank, ultrasonic fine washing tank, bubble rinsing tank, spray tank, and hot air drying tank. This segmented process design effectively avoids secondary pollution (cross slot phenomenon) caused by dirt detachment during single slot cleaning. In practical operation, workers use electric hoists or manually place the cleaning baskets containing workpieces into each tank in sequence, completing the entire process of oil removal, fine washing, rinsing, and drying in sequence.

工作原理與效能優勢

Working principle and efficiency advantages

其核心原理依然是超聲波的“空化效應”。高頻聲波在清洗液中產生數以萬計的微小氣泡，氣泡潰滅瞬間釋放的巨大沖擊力能夠深入工件的盲孔與深縫，將油污、拋光蠟及金屬屑等頑固污垢徹底剝離。同時，配合清洗劑的化學去污作用以及鼓泡、噴淋等輔助物理手段，實現了極佳的清洗效果。

The core principle is still the "cavitation effect" of ultrasound. High frequency sound waves generate tens of thousands of tiny bubbles in the cleaning solution. The huge impact force released when the bubbles collapse can penetrate deep into blind holes and deep seams of the workpiece, completely removing stubborn dirt such as oil stains, polishing wax, and metal shavings. At the same time, with the chemical decontamination effect of cleaning agents and auxiliary physical means such as bubbling and spraying, excellent cleaning results have been achieved.

靈活配置與操作規范

Flexible configuration and operational standards

多槽手動清洗機具有極高的定制化與靈活性。企業可根據工藝需求，隨時調整清洗液的種類、溫度、超聲波功率及清洗時間。然而，在手動操作過程中需嚴格遵守規范：首先，清洗液的添加量不宜超過槽體高度的3/4，以防工件放入時發生串槽；其次，需根據工件特性選擇網眼大小合適的不銹鋼清洗筐，避免因塑膠材質產生靜電或網眼過大導致超聲衰減；最后，應合理設定清洗時間（通常每道工序3-5分鐘）及加熱溫度（一般不超過70℃），以確保清洗質量并延長設備使用壽命。

The multi slot manual cleaning machine has extremely high customization and flexibility. Enterprises can adjust the type, temperature, ultrasonic power, and cleaning time of cleaning solution at any time according to process requirements. However, strict adherence to regulations is required during manual operation: firstly, the amount of cleaning solution added should not exceed 3/4 of the height of the tank to prevent cross slot when the workpiece is placed; Secondly, a stainless steel cleaning basket with an appropriate mesh size should be selected based on the characteristics of the workpiece to avoid ultrasonic attenuation caused by static electricity generated by the plastic material or excessive mesh size; Finally, the cleaning time (usually 3-5 minutes per process) and heating temperature (generally not exceeding 70 ℃) should be reasonably set to ensure cleaning quality and extend equipment service life.

憑借造價低、投資少、針對性強且操作簡便等優勢，多槽手動超聲波清洗機被廣泛應用于五金沖壓、精密機械零部件、電子線路板、半導體硅片、醫療器械及珠寶首飾等行業的表面清潔處理中。

With the advantages of low cost, low investment, strong targeting, and easy operation, multi slot manual ultrasonic cleaning machines are widely used in surface cleaning treatment of industries such as metal stamping, precision mechanical components, electronic circuit boards, semiconductor silicon wafers, medical equipment, and jewelry.